Home > Electrical Safety Test Equipment >

1.8KG Loaded Aluminum Impact Vessel for Hob Surface Testing Compliant with IEC60335-2-6 and IEC60335-2-9

Product Categories

Electrical Safety Test Equipment [188]
Environment Test Equipment [62]
Impact Test Equipment [76]
EMC Test Equipment [27]
Lamp Cap Gauge [30]
Test Finger Probe [102]
Plug Socket Tester [81]
Appliance Couplers Testing Equipment [12]
Induction Cooker Vessels [20]
IP Testing Equipment [65]
Type C Goniophotometer [9]
Led Testing Equipment [33]
Integrating Sphere Spectrophotometer [8]
Transformer Testing Equipment [10]
Ac Dc Power Supply [10]

Pego Electronics (Yi Chun) Company Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

1.8KG Loaded Aluminum Impact Vessel for Hob Surface Testing Compliant with IEC60335-2-6 and IEC60335-2-9

Name: 18KG Loaded Aluminum Impact Vessel for Hob Surface Testing Compliant with IEC6033526 and IEC6033529
Brand: Pego Electonics
Price: 200 USD

Brand Name : Pego Electonics

Model Number : PG-AV1.8

Certification : CNAS Calibation Certificater

Place of Origin : China

MOQ : 1 set

Price : USD 200-USD500

Payment Terms : T/T

Supply Ability : 50 sets/month

Delivery Time : 5-10 days

Packaging Details : carton

Normative standard : IEC60335-2-6, IEC60335-2-9

Application : for testing the hob surface to withstand the impact stresses from a 150mm height

Impact Weight : 1.8KG

Material : Aluminum

Contact Now

Impact Vessel with 1.8KG Loaded for Testing Hob Surface

Introduction

The impact vessel is designed to meet the test requirements of IEC60335-2-6 clause 21.102 and IEC60335-2-9 clause 20.101 to verify the ability of hob surface to withstand the stresses. The vessel is dropped flat 10 times from a height of 150mm onto the cooking zone of hob element, and the hob surface shall not crack and the appliance shall withstand the electric strength.

The vessel is made of aluminum, and the flat base has a diameter of 120mm±10mm, its edges being rounded with a radius of at least 10mm. the vessel should be uniformly filled with a least 1.3kg of sand or shot so that the total mass is 1.8kg±0.01KG.

2. Specification

Vessel Diameter	120mm±10mm
Edge radius	≥R10mm
Weight of Vessel	≤0.5KG
Configuration	Equip with shot ≥1.3KG

Product Tags: